Water Softener Repair
in Pasadena, CA
Softener not regenerating, salt not going down, or hard water coming back in Pasadena? We repair every major softener brand, with a flat-rate price up front.
✓ CA C-36 Licensed & Insured
✓ Same-Day Service Available
✓ Free Estimates
✓ Locally Owned
✓ Se Habla Español
Signs Your Softener Needs Repair
Hard water spots coming back. Salt that isn’t going down. A brine tank full of water. A softener that runs nonstop, leaks, or shows an error. These problems usually come down to a few parts: the control valve, injector, brine float, resin, or a clogged drain line. We test your water, find what failed, and fix it with the right parts, usually in one visit. If your system is past saving, we’ll tell you straight and walk you through our water softener installation options instead.
What We Repair
Control Valves & Timers
The control valve is the brain of your softener. We repair and replace Fleck and Clack valves, fix timers that lost their settings after a power outage, and reprogram the system for your water hardness and household size.
Brine Tank & Salt Problems
Salt bridges, mushy salt, a stuck brine float, or a brine tank full of water. We clean out the tank, fix the float and brine lines, and get your softener drawing salt again so it can regenerate the way it should.
Resin, Leaks & Bypass Valves
Worn-out resin, a cracked tank, or a leaking bypass valve. We replace the resin, fix leaking parts and fittings, and test your water after the repair to make sure it’s soft again before we leave.
Brands We Repair
We repair most home water softeners, including systems built on Fleck and Clack control valves, plus Pentair, Halo, SpringWell, and store-bought brands. Not sure what you have? Text us a photo of the label and we’ll tell you before we come out.
What To Expect
Every repair starts with a water hardness test and a full check of your system: the control valve, brine tank, drain line, and bypass valve. We find the cause, then give you a flat-rate price before any work starts. Once you approve, we make the repair, run a full regeneration cycle, and test your water again before we leave. If your softener isn’t worth fixing, we’ll show you why and give you a fair quote on a new one, with no pressure.
1
Call or Text
Same-day visits available
2
Test & Diagnose
Flat-rate price before any work
3
Repair & Retest
Soft water before we leave
Water Softener Repair Across
Greater Los Angeles
We repair water softeners in Pasadena and across Greater Los Angeles. In the San Gabriel Valley, that includes Arcadia, Sierra Madre, San Marino, South Pasadena, and San Dimas. Farther east, we serve Claremont, La Verne, Diamond Bar, and Walnut. On the Westside and in the Valley, we cover Beverly Hills, Burbank, Glendale, Encino, Sherman Oaks, and Calabasas, and on the Peninsula, Palos Verdes Estates and Rancho Palos Verdes. If you're dealing with hard water, scale buildup, or a softener that's stopped working, give us a call. Looking to get rid of chlorine taste and smell instead? See our whole-house water filtration page.
Frequently Asked Questions
-
Usually it’s one of four things: the softener isn’t regenerating, it’s out of salt or has a salt bridge, the resin is worn out, or the bypass valve was left open. We test your water, check each one, and fix the real cause.
-
A brine tank full of water usually means a clogged injector, a stuck brine float, or a blocked drain line. The softener can’t pull the salt water out, so it can’t regenerate. It’s a common repair, and we can usually fix it in one visit.
-
Yes. We repair most home softeners, including systems built on Fleck and Clack valves. We test your water first, find what failed, and give you a flat-rate price before any work starts.
-
It depends on the part that failed. Simple fixes, like a clogged injector or reprogramming, cost less, while a new control valve or new resin costs more. You’ll always get a flat-rate price before we start.
-
If the salt level isn’t going down, the softener probably isn’t regenerating. Common causes are a salt bridge, a clogged injector, or a timer that lost its settings after a power outage. We’ll find which one it is and fix it.
-
Yes. We repair store-bought softeners too, as long as parts are still available. Text us a photo of the label and we’ll let you know before we come out.
-
If your softener is under 10 to 12 years old and the tank isn’t cracked, a repair usually makes sense. If it’s older, needs both a new valve and new resin, or keeps breaking, a new system is often the better buy. We’ll give you a straight answer, not a sales pitch.
Serving 60+ Cities Across Greater Los Angeles
Fast service and the same fair prices, whether you’re in Beverly Hills, Burbank, or Arcadia. We cover Greater LA and never charge extra for the drive.
San Gabriel Valley & Foothills
Pasadena, Altadena, Sierra Madre, La Cañada Flintridge, La Crescenta, Monrovia, Duarte, Arcadia, Temple City, San Marino, South Pasadena, Alhambra, San Gabriel, Rosemead, Glendora, San Dimas, La Verne, Claremont, Covina, West Covina, Walnut, Diamond Bar, Hacienda Heights, Rowland Heights
Northeast & Central Los Angeles
Eagle Rock, Highland Park, Glendale, Mount Washington, Silver Lake, Los Feliz, Hancock Park, Echo Park, Atwater Village, Hollywood, Downtown LA
Westside & Beach Cities
Beverly Hills, West Hollywood, Bel Air, Brentwood, Westwood, Century City, Santa Monica, Culver City, Mar Vista, Pacific Palisades, Venice, Malibu, Manhattan Beach, Palos Verdes Estates, Rancho Palos Verdes
San Fernando Valley
Burbank, Toluca Lake, North Hollywood, Studio City, Sherman Oaks, Encino, Tarzana, Woodland Hills, Van Nuys, Valley Village, Sunland-Tujunga, Northridge, Granada Hills, Porter Ranch, Chatsworth, West Hills, Calabasas, Hidden Hills, Agoura Hills, Westlake Village
Don't see your city? Call us — we likely still cover you.
Ready for Soft Water Again?
Get your softener fixed by a licensed, locally owned plumbing company that specializes in home water treatment. Call or book online and we'll get you on the schedule fast.